{"id":324,"date":"2014-04-14T23:59:01","date_gmt":"2014-04-14T23:59:01","guid":{"rendered":"http:\/\/graphicdisplayusa.com\/blog\/?p=324"},"modified":"2020-02-11T23:55:21","modified_gmt":"2020-02-11T23:55:21","slug":"fit-creates-reusable-display-system-gatorfoam-board","status":"publish","type":"post","link":"https:\/\/3acompositesusa.com\/blog\/fit-creates-reusable-display-system-gatorfoam-board\/","title":{"rendered":"FIT Creates Reusable Display System With Gatorfoam Board"},"content":{"rendered":"

\"621628abd6a1c2890166f0e329b520d5_f422\"<\/a><\/p>\n

As one of New York City\u2019s largest and most well-known design schools, the Fashion Institute of Technology (FIT)<\/a> \u2013 a State University of New York college of art, business, design and technology \u2013 is known for its high-profile public exhibitions.<\/p>\n

Each year The Museum at FIT hosts nearly 100,000 visitors, who are both entertained and educated about the art of fashion through innovative exhibitions. Additionally, the nine-building campus features several other large exhibition spaces, including FIT\u2019s main-entrance lobby that opens to a highly-trafficked midtown Manhattan street as well as a major auditorium. These exhibition areas accommodate any number of displays, including departmental shows, outside conference exhibits, college open-house presentations and senior projects.<\/p>\n

\"47a8ccdb3262ffa3ed2d0ed8f88c1752_f421\"<\/a>\u201cThese exhibitions often require reinventing the wheel each time they are developed, including spending thousands of dollars for materials and systems that will be thrown away,\u201d said Craig Berger, assistant professor and chair of the Visual Presentation and Exhibition Design Department, FIT School of Art and Design.<\/p>\n

Previously, these temporary displays were created with structural fiberboard panel systems which, according to Berger, were \u201cexceedingly heavy and almost impossible to use for exhibits.\u201d<\/p>\n

Department staff envisioned a better way to accommodate these temporary exhibits and created their own reusable modular display system with heavy-duty-yet-lightweight Gatorfoam graphic display board attached to AUTOPOLE and Octanorm display pieces that already were on hand at FIT.<\/p>\n

Fifty Gatorfoam graphic display boards in the 3\/8-inch thickness and the 48-by-96-inch sheet size were utilized \u2013 some at that size and others cut to 40 inches by 96 inches on a table saw. The Gatorfoam panels were used in either their natural state or covered in burlap fabric in the light gray color to create a surface for high pin holes. The burlap was adhered to the Gatorfoam with silicon adhesive.<\/p>\n

\"e4f471375f9dbe922ad4f64ea436c3f9_f420\"<\/a>\u201cThe Gatorfoam panels are thick enough to handle long pins and durable enough to last five years or more,\u201d said Berger. \u201cThe panels also are light enough to be moved and stored easily. \u2026 This modular system can be used for all temporary exhibits at the school and is adaptable for any number of uses \u2013 from photography shows to senior projects and art exhibits. It also can be set up as backdrops behind mannequins.\u201d<\/p>\n

FIT\u2019s new custom modular display system with Gatorfoam already has been utilized for a photography exhibit in place for two months in early-2014 and has been requested for three more displays this year, according to Berger.<\/p>\n

\u201cWe expect this system to have a long, bright future enhancing the image of the college and its departments,\u201d said Berger.<\/p>\n

photography courtesy of \u00a9 The Fashion Institute of Technology<\/p>\n